CyberGuard SnapGear Installationsanleitung

Quick Installaon GuideSecure SnapGearSG310SG560SG565SG580Desktop Appliancewww.securecompung.com

109 Enter an IP address and Subnet Mask for the SG unit's LAN connection. Take note of the IP address and subnet mask; you will need them later o

1113 Click Next. The page that appears depends on the selection you made on the ISP Connection page:– If you selected Cable Modem, Modem, or ADSL, con

1214 Select an option for the ISP connection.– Select DHCP if you plan to use a DHCP server already in use on your LAN.– [Recommended] Select Manual

1317 Enter the Subnet Mask to use for the WAN port.18 [Optional] Set the default Gateway Address.19 [Optional] Set the IP address of the Domain Name S

14Step 5 – Configure the switchThis page displays if you are setting up the SG560, SG565 or SG580. If you are setting up a different model, skip to “S

15Step 6 – Confirm settings; connect the SG unit to your LANReview your configuration selections. If you are satisfied with your settings, click Finis

16Step 7 – Set up the PCs on your LANEach PC on your LAN must now be assigned an appropriate IP address, and have the SG unit's LAN IP address de

17Step 7a – Automatic LAN configuration using the SGDHCP serverBy selecting Manual Configuration for the SG unit's LAN connection, and supplying

18Step 7b – Automatic LAN configuration using an existing DHCP serverIf you chose the Obtain LAN IP address from a DHCP server on LAN option, we stron

19Step 7c – Manual LAN configurationClick Start > Settings > Control Panel, and then double-click Network Connections. If presented with multipl

2Copyright©2008 Secure Computing Corporation. All rights reserved. No part of thispublication may be reproduced, transmitted, transcribed, stored in a

20Step 8 – Register your SG unitYou must register your SG unit in order to receive technical support. A current e-mail address is required to register

21Further readingFor detailed configuration information, refer to the SnapGear Administration Guide, which is available on the SG CD in the /docs dire

22Product complianceFor product compliance information, refer to Compliance.pdf on the SG CD in the /docs directory.Product specifications• Power (SG3

23Firmware supportYour SG unit has been preprogrammed with firmware current at the time of manufacture. Should you want to upgrade the firmware, you c

24Technical supportSecure Computing works closely with our reseller partners to offer the best worldwide technical support services. Your Secure Compu

25SnapGear Limited Hardware WarrantySecure Computing Corporation, on behalf of itself and its subsidiaries, (hereinafter"Secure Computing")

26SECURE COMPUTING DOES NOT ACCEPT LIABILITY BEYOND THEREMEDIES PROVIDED FOR IN THIS LIMITED WARRANTY OR FORCONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAM

274. LIMITED SOFTWARE PRODUCT WARRANTY. Secure Computingwarrants that the medium/media on which its Software is recorded is/are free fromdefects in ma

287. PROTECTION OF CONFIDENTIAL INFORMATION. The SoftwareProduct is delivered to you on a confidential basis and you are responsible foremploying reas

2911. ENTIRE AGREEMENT. This Agreement is our offer to license the SoftwareProduct to you exclusively on the terms set forth in this Agreement, and is

3OverviewThis guide walks you through the installation of your SnapGear (SG) unit. Installing SnapGear into a well-planned network is quick and easy.

30

31

www.securecompung.comCorporate Headquarters55 Almaden Blvd., Suite 500San Jose, CA 95113 USATel +1.800.379.4944Tel +1.408.979.6100European Headquart

4Step 1– Unpack the SG unitIn addition to this document, check that you have the following items included with your SG unit:• Power cable• Power adapt

5Step 3 – Set up a single PC to connect to the SG unitThe SG unit ships with initial network settings of:• LAN IP address: 192.168.0.1• LAN subnet mas

6Note: IP addresses and screen captures in this document are intended as examples. They do not represent a proper or complete configuration, nor the c

7Step 4 – Set up SG's password and LAN connection settingsLaunch your Web browser and navigate to 192.168.0.1.Note: If you are unable to browse

8.4 Enter and confirm a new password for your SG unit. This is the password for the user root, the main administrative user account on the SG unit. It

97 Select an option for your LAN configuration:–[Recommended] To manually configure your LAN and optionally enable the SG unit's built-in DHCP se